Maintenance

Wooden furniture

Wood furniture in general

In FDB Møbler we are proud to offer furniture that is handmade and made from natural materials, giving each product its own unique character. Please note that due to these handmade processes and natural materials, slight variations in size, shape, grain structure and color may occur between different productions. 

Wood can be affected by humidity, air temperature and sunlight over extended periods. Always protect the wood from hot objects such as pots and candles and potted plants that can give off moisture. 

To avoid color differences caused by light, it is recommended not to have permanent decorations on the table such as placemats or vases for the first month, regardless of the type of wood furniture. 

Care and maintenance

Oiled wood

When cleaning, wipe the furniture with a cloth wrung out with warm water. Wipe up spilled liquids immediately to avoid stains. 

Regular care and maintenance of the wood will ensure the longevity of your furniture. For surface maintenance, it is recommended to treat the wood with furniture oil 2-4 times a year or as needed. First clean with a hard-wrung cloth and let it dry. If the wood grain is raised, lightly sand the surface with 220 grit or higher. Then follow the instructions for the chosen oil, starting in a less visible area if necessary. 

IMPORTANT: 

1. When surface treating a worktop, it is important to remember to treat both sides, otherwise there is a risk that the solid wood will warp. 
2. When surface treating wicker furniture, be careful not to hit the paper wicker with the oil. 
3. It is important to wipe off any excess oil on furniture after the recommended drying time, otherwise it will leave the furniture with a greasy surface. 
4. After using rags or sponges, it is important to place them in a plastic bag with water and close them airtight before throwing them away, as the oil can make them self-igniting. Please follow the oil manufacturer's instructions for proper disposal.

Care and maintenance

Varnished and painted wood

When cleaning, wipe the furniture with a firmly wrung cloth with warm water. Spilled liquids should be wiped up immediately to avoid damage. Lacquered and painted furniture requires no further maintenance. 

Care and maintenance

Wax-treated wood

 When cleaning, wipe the furniture with a firmly wrung cloth with warm water. Spilled liquids should be wiped up immediately to avoid stains. For maintenance of waxed furniture, minimal preparation is required. 

When the furniture appears dry, refinish the furniture by wiping it with a cloth wrung out with warm water and let dry. Then apply an even layer of wax to the furniture and polish with a dry cotton cloth.  

Care and maintenance

Soap-treated wood

When cleaning, wipe the furniture with a cloth wrung out with warm water. Wipe up spilled liquids immediately to avoid stains. For wood maintenance, use soap flakes 1-2 times a year or as needed. The more treatments, the better the protection. To treat, whisk soap shavings with a little demineralized water at a ratio of 1:10, stirring until the shavings are thoroughly dissolved. Do not pour the solution directly onto the furniture, but apply with a colorless cotton cloth to ensure the furniture is not soaked. For the first few finishes, the wood fibers will most likely stand up, so use a sanding sponge briefly and gently on the surface when the furniture is dry.

Specific for the J80 series:

As the back is molded plywood, it is important to be careful when finishing to avoid dissolving the glue in the veneer. If necessary, use an atomizer for this particular area to ensure that the back piece does not get too wet.

Care and maintenance

Linoleum

When cleaning, wipe the furniture with a firmly wrung cloth with warm water. Wipe up spilled liquids immediately to avoid damage. 

Linoleum consists of linseed oil, resin, wood flour, limestone and natural color pigments. With regular care, you can ensure that the surface stays beautiful for many years. It is recommended to treat linoleum surfaces with linoleum soap 3-4 times a year or as needed. Follow the instructions on the specific product. Using linoleum soap will extend the life of the furniture. 

Care and maintenance

Wicker

Paper yarn is treated with a thin layer of wax, which makes the paper yarn more resistant. As it is a natural material, a darker patina will appear over time. 

If spilled on the paper, remove as much of the liquid as possible with a dry, colorless cloth. Then dab the stain lightly with a firmly wrung cloth. Avoid rubbing the stain and do not use chemicals, detergents or cleaning agents. Discoloration of the paper yarn can occur from spills of strong liquids such as red wine, fruit juice, strongly colored food or contact with non-colorfast clothing. If desired, use a cushion to protect the paper yarn. 

Cushioning

In general

In FDB Møbler we are proud to offer furniture that is durable and easy to maintain. Please note that there may be slight variations in color between the different productions. 

Please be aware of the possibility of permanent discoloration when in contact with non-colorfast clothing. Sharp objects can scratch and damage upholstered furniture. When placed in direct sunlight, textiles and leather will always fade over time. 

Vacuum upholstered furniture at medium power and use a furniture nozzle that does not damage the upholstery. 

Care and maintenance

Upholstery - Textile

In case of stains, try dabbing with a firmly wrung cotton cloth with warm water, or use a small amount of pH-neutral and undyed detergent diluted in lukewarm water. It is important to dab the stain and soak up as much of the liquid as possible afterwards with a colorless cloth or dishcloth. Avoid soaking and always use a clean cloth. For final cleaning, use only clean water without soap. If stain remover is used, follow the instructions on the individual product. For removable covers, follow the washing instructions on the label. 

Care and maintenance

Upholstery - Leather

When using genuine leather, no two cuts will be the same, as the skin can be marked by scars and wrinkles. 

Protected leather: 

With this type of leather, a surface treatment is used to ensure a uniform color and surface. Wipe up spilled liquids as soon as possible and wipe with a dry cloth if necessary. Make sure to wipe the entire surface, otherwise stains may form. To finish the leather, use soap shavings. This is done by whipping the shavings with a little demineralized water and then using the foam to apply to the leather. When the leather is dry, wipe with a firmly wrung cotton cloth. 

Core leather:
With this type of leather, the surface is untreated, which emphasizes the unique beauty of the leather. As it is an untreated natural material, a unique patina will appear over time and natural drying of the leather may occur. Wipe up spilled liquids as soon as possible and wipe with a dry cloth if necessary. Make sure to wipe the entire surface, otherwise stains may form. For leather finishing, use leather cleaner and leather cream. Follow the instructions on the specific product. 

Garden furniture

In general

At FDB Møbler we are proud to offer furniture that is handmade and made from natural materials, giving each product its own unique character. Please note that due to these handmade processes and natural materials, slight variations in size, shape, grain structure and color may occur between different productions. 

Wood can be naturally affected by the outdoor environment and will therefore patina accordingly, depending on the type of wood. Always protect the wood from hot objects such as pots. 

It can be an advantage to winterize the furniture in a shed or under cover. If this is not possible, use a garden furniture cover. 

Care and maintenance

Sammen and Ermelund series

Like any other wooden furniture that is exposed to the elements, maintaining your garden furniture will extend its lifespan. If you want the furniture to have a patinated silver gray look, stop after step 4. 

Step-by-step guide:

1.Wash down thoroughly with the hard side of a scouring pad
Mix the wood cleaner in a bucket with water according to the instructions on the product. Wash the furniture thoroughly with the hard side of a scouring pad along the grain. The more thoroughly you clean the furniture, the easier the subsequent work will be. Let the furniture dry for about 24 hours. 

2. Sand everywhere with sandpaper
After the furniture is completely dry, sand along the grain with 180-grit or higher. Use coarser sandpaper first if there are large scratches or nicks. Sand all surfaces of the furniture for the best result. 

3. Wipe the furniture to remove sanding residue 
Wipe the furniture with a cloth wrung out in clean water to remove sanding residue. 

4. Tighten bolts and screws if necessary 
Remember to tighten bolts and screws so that the garden furniture is not wobbly. 
If you want the furniture to have a patinated silver gray look, stop after this step. 

5. apply oil in the grain of the wood in an even layer
When the furniture is completely dry, apply the oil in an even layer in the grain of the wood, using a brush or an old cotton cloth. 

6. Wipe off any excess oil 
Allow the oil to dry according to the instructions, then wipe off excess oil with a clean cotton cloth. Allow the furniture to dry for at least 24 hours after completing the treatment before it is ready for general use. It may take a few days for the oil to fully harden. 

IMPORTANT:

1. When surface treating the worktop, it is important to remember to treat both sides, otherwise there is a risk of the solid wood warping. 
2. It is important to wipe off any excess oil on furniture after the recommended drying time, otherwise it will leave the furniture with a greasy surface. 
3. After using rags or sponges, it is important to place them in a plastic bag with water and close them airtight before throwing them away, as the oil can make them self-igniting. Please follow the oil manufacturer's instructions for proper disposal. 

Care and maintenance

Teglgaard series

Cords:
The cords are 100% polyester and require minimal maintenance, but for bird droppings and the like, use a hard-wrung cloth with warm water and a little pH-neutral and colorless detergent. Wash with clean water afterwards. 

Stainless steel: 
When cleaning, wipe with a cloth wrung out with warm water, possibly with a little pH-neutral and colorless detergent. Wipe with a dry cloth to avoid streaks. 

Over time, minor rust stains may appear on stainless steel surfaces, especially if the furniture is located in coastal areas. In most cases, these can be removed with rust remover in the exposed areas. Follow the instructions on the specific product. 

Table top: 
When cleaning, wipe with a hard wrung cloth with warm water, possibly with a little pH-neutral and colorless detergent.